How often do I need to clean my PelPro stove?
PelPro stoves require daily, weekly, and seasonal cleaning depending on how often the stove is used. Routine cleaning is essential for peak performance.
| Frequency |
Part |
Cleaning Procedure |
| Daily or As Needed |
Fire Pot |
Remove the fire pot
Scrape clean and remove ashes
Replace fire pot
Stove must be turned off or cold |
| Weekly or as needed |
Firebox |
Remove baffles and vacuum residual ash
Remove ashes from firebox floor |
| Glass |
Apply ceramic glass cleaner
Use non-abrasive cloth to remove residue |
| Monthly or as needed |
Door Inspection |
The gasket between the glass and firebox should be inspected periodically to make sure there is a good seal
Check for loose or frayed gasket
A piece of paper between door gasket and firebox should not pass through |
| Hopper |
Empty hopper of any pellets
Vacuum any remaining pellets/debris from the hopper |
| Annually or as needed |
Electrical Components |
Identify and remove any debris
Verify all connections are secur |
| Convection Blower |
Remove right and left side panel to access and remove convection blower
Vacuum any debris from the fan blades and blower housing |
| Exhaust Blower |
Remove left side panel to access and remove exhaust blower
Vacuum any debris from the fan blades and blower housing |
| Venting |
Soot, creosote, and fly ash will collect in the exhaust venting system and restrict the flow of the flue gases. This build up will occur more quickly in horizontal sections and elbows. Disassembly may be required.
Remove termination cap
Inspect for debris and blockage and remove
Brush out to remove dust and hard buildu
Use the appropriately sized chimney brush to remove ash and buildup from the venting
Ensure there are no obstructions in the outside air kit cap |